Padel Eks

FIP tournament pressurised match balls and altitude-compensated training cylinders documented by internal core pressure.

A tennis ball rebounds at 135 to 147 centimetres from a 2.54-metre drop; an official padel ball must rebound between 135 and 145 centimetres while carrying lower internal gauge pressure to maintain glass-rebound playability. We document woven wool needle felt composition, gas core retention curves, vulcanized rubber bladder thicknesses, and case pack logistics for tournament organizers and club pro-shop operators.

Core Pressure Baseline 11.2 PSI (FIP Standard)
Felt Specification 58% English Woven Wool
Commercial Tiers $9,000–$18,000 per project
Logistics Supply Master cartons (24 tubes / 72 balls)

Standardization Ledger

Operating temperature, altitude, and glass wall condensation rapidly degrade sub-par rubber cores. The table below outlines international padel governing standards against our measured ball series.

Regulatory Compliance
International Padel Federation (FIP) Rulebook Section III compliant
Outer Diameter
6.35 cm to 6.77 cm (calibrated laser micrometer check)
Calibrated Mass
56.0g to 59.4g across all batch runs
Internal Core Charge
11.0 to 11.4 psi nitrogen-rich gaseous charge inside hermetic PET tubes
Rebound Drop Verification
135cm to 145cm bounce height when released from 2.54m onto smooth granite base
Forward Deformation Range
0.81cm to 0.89cm under 8.165kg static test mass
Three optic yellow pressurised padel balls beside an opened pressure cylinder
Padel Eks Tour Pressurised Core Verification Charlotte Facility QA • Batch FIP-112

Catalogue Divisions

Every pressurized product line carries a full technical datasheet documenting felt nap, core rubber compound, altitude rating, and commercial case pack specifications.

Three optic yellow pressurised padel balls beside an opened pressure cylinder FIP MATCH COMPLIANT

Tour Pressurised Padel Match Balls (3-Pack)

High-modulus woven wool felt (58% natural wool content) over a responsive dual-cure rubber core. Factory charged to 11.2 psi to generate precise court rebound and predictable wall exit velocity during sanctioned matchplay.

Baseline Pressure
11.2 PSI
Felt Construction
58% English wool / 42% nylon needle weave
Tube Packaging
Hermetic aluminum pull-ring cylinder (3 balls)
Catalogue Tier: $9,000–$18,000 Review Datasheet
Altitude-rated padel balls engineered for low-pressure high elevation play ALTITUDE COMPENSATED

High-Altitude Training Padel Balls

Engineered for mountain venues or facilities situated above 500 meters where low atmospheric pressure causes standard balls to launch uncontrollably off glass. Built with a thickened 3.8mm rubber diaphragm charged at 9.8 psi.

Baseline Pressure
9.8 PSI (altitude adjusted)
Core Bladder
Thickened 3.8mm natural rubber diaphragm
Recommended Elevation
500m to 2,000m above sea level
Catalogue Tier: $9,000–$18,000 Review Datasheet

Commercial Quotation Basis & Project Tiers

Equipment distributors, tournament promoters, and club network operators use our turnkey digital catalogue setups to showcase inventory. Pricing is structured across three verified brackets.

Core Catalogue Tier
3,000–9,000 USD per project • 8 structured pages, template architecture, basic brand filtering, form integrations, 12-item catalog setup.
Integrated Commercial Tier
9,000–18,000 USD per project • 12 structured pages, custom UI layout, faceted brand filters, CRM webhooks, tax/shipping setup, cards styling.
Bespoke Enterprise Tier
18,000–28,000 USD per project • 15 pages, complete custom engineering, multi-attribute filter matrices, full inventory sync, bespoke API endpoints.
Quote Determining Factors
Number of catalogue pages (8 to 15); depth of brand filters; CRM webhook routing; copy provenance; tax and freight shipping rule configurations.
Engineering Principal
Ivan Petrov, web developer since 2021; verified North Carolina LLC holding a portfolio of 12 commercial product catalogues.

Procurement & Deployment Process

From physical ball pallet fulfillment to club catalogue architecture deployment, every trade order follows four controlled operational phases.

1. Intake & Elevation Audit
We verify your tournament sanctioned requirements or facility elevation above sea level to confirm correct internal pressure baseline (11.2 psi versus 9.8 psi).
2. Trade Estimate Formulation
We issue an itemized trade proposal within our confirmed pricing tiers ($3,000–$9,000, $9,000–$18,000, or $18,000–$28,000) detailing case quantities, freight terms, and digital platform parameters.
3. Platform Deployment & Logistics
Ivan Petrov configures brand filter matrices, forms, and CRM integrations while physical cartons are palletized at our Charlotte NC distribution hub.
4. Quality Handover & Verification
Production catalogue code is delivered directly to client servers and freight manifests are confirmed with bill of lading documentation.

Application Boundaries & Trade Disclaimers

We supply trade buyers and commercial operators exclusively. Review the operational boundaries below before initiating an inquiry.

Target Entities
Regional tournament organizers, multi-court commercial padel facilities, equipment distribution reps, and club retail directors.
Refusal of Service
We do not sell single-can individual consumer orders or offer instant checkout payment gates. All commercial allocations are quoted on trade inquiry basis.
Tennis Substitution Defect
We will never supply standard pressurized tennis balls for padel court use. Standard tennis cores run at 14 psi and rebound 10% higher than FIP regulations allow, causing hazardous glass-rebound dynamics.

Submit Ball Supply Trade Specification

Submit your tournament tube quantities or pro-shop catalogue integration scope below. Direct trade responses are handled by Ivan Petrov.

Please provide your full name.
Please provide a valid business email address.
Please enter a valid telephone number.
Please enter your facility or delivery address.
Consent is required to process your trade specification.